carb prob.

["robert k. smith" <rksmith46@hotmail.com>]

hi joaquin, bob smith here. i assume you didnt get the pistons and domes 
mixed up.
is it possible that you put the front domes on the rear , and the rear on 
the front? if youre
ok so far, then look in the mouth of the carbs to see if the needles got 
bent and are
holding the pistons up at idle, or are sticking and not moving up smoothly 
on
acceleration. you can reach in (with engine off) and raise the pistons 
manually
up and down to see if they are moving smoothly. good luck