Thanks Pat,
I'll try cleaning it first. There are quite a few relays that I haven't
gone over yet like the highbeams.
Which raises another question........
Has anyone replace the turn signal relay with something that has more
audible contacts?
I've left mine one more times than I can count.
Steve
----- Original Message -----
> You might try removing the intermittent instrument regulator and
> removing the metal cover from it. You will find a pair of contacts in
> there that you can clean with some emery paper. Be careful to not bend
> anything. My instrument regulator developed an intermittent connection
> where one of the rivets go through the phenolic and attach to the wire
> connectors. I was able to clean mine up and solder them to get the
> regulator to work until I was able to order a replacement from the
> dealer.s I recall the replacement cost about $20.
|