Chris,
I may have the 5-speed shift plate in a 68 car with an L16 and 4 speed
tranny. I was told the car had a 5 speed in it when I purchased it, but if
there is a 5th gear there I have yet to find it.
I have never noticed what a 67.5 5-speed looks like, or how it attaches to
the tunnel. Mine has 4 mounting holes at the corners. If it is what you
are looking for I will consider a straight across trade a good deal and use
your 4-speed plate in my 68.
You can pretty much see what I have at:
http://www.datsun2000.com/barney/Number_5_interior-1-500.jpg
Tom
68 2000 - Mr. Hyde
Portland
http://www.datsun2000.com
-----Original Message-----
From: owner-datsun-roadsters@autox.team.net
[mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of chris bond
Sent: Saturday, March 05, 2005 8:59 PM
To: datsun-roadsters@autox.team.net
Subject: Parts list for my car
Hi List. I'm posting this to see if a vendor or enthusiast has all the
things
I need in one shot before I start looking through all the sites. I have a
67.5
1600 I need springs for my carbs, the hose from slave cylinder.thermostat.
rubber boot at tranny, both radiator hoses,I have a radiator with a slight
angle upwards for bottom hose, not original radiator, lert and right lower
interior panels (in front of door panels) I put a 5 speed in this car so I
need a 67.5 2000 shift plate. and boot (I have 2 really nice 4 speed shift
plates, one is new original condition and the other is chromed) I realized
they wouldnt fit after looking at the trannys, side by side) I'm willing to
buy any condition shift plate original- chromed, aluminum, home made,
aftermarket, whatever. Im not concerned about originality. Sid gave me one
in
rough condition, but I cant find it. Atlanta is coming up soon, I gotta get
on
this. Thanks for your time. Chris Bond
|
