You can also prime the carbs by putting some gas in one of those plastic
ketchup squeeze bottles with the skinny spout and using that to squirt gas
into the fuel line. Easier than pulling the tops off the float bowls, but
you may want to cut a neoprene gasket to keep the gas from leaking out of
the squeeze-bottle when it's upside down.
> -----Original Message-----
> From: owner-datsun-roadsters@Autox.Team.Net
> [mailto:owner-datsun-roadsters@Autox.Team.Net]On Behalf Of
> Keith0alan@aol.com
> Sent: Monday, November 01, 2004 11:52 AM
> To: richard@tntarch.com; datsun-roadsters@Autox.Team.Net
> Subject: Re: Priming SU's
>
>
> I usually use starter fluid in the spray can. Take off the air cleaner,
> raise the slide and squirt some in. The other option is the
> remove the float bowl
> overflows and CAREFULLY pour gas in to fill the float bowls.
> Doesn't take
> much, a couple of ounces or so.
>
> keith
Participate in Democracy.
"In the end, we will not so much remember the words of our enemies,
but the silence of our friends." Martin Luther King, Jr.
|