datsun-roadsters
[Top] [All Lists]

Re: NISMO comp springs - how many coils should they have???

To: "chriscoker@mail.comcast.net" <chriscoker@pop3.comcast.net>
Subject: Re: NISMO comp springs - how many coils should they have???
From: RWM <RWM@rwmann.com>
Date: Fri, 14 Feb 2003 13:51:49 -0500
Interesting.  Which ones are lighter, and by how much?

- RWM

"chriscoker@mail.comcast.net" wrote:
> 
> I've had two types of NISMO comp springs side by side, the number of coils 
>was different, as was the wire diamter.  I worked through the math, and the 
>spring rate was essentially the same.  The spring with the larger number of 
>coils will have a slightly larger wire diamter.  I think the spring with the 
>larger number of coils is a later design, as I recently bought a couple of 
>sets of these from NISMO.  I compared them with the 'older style,' which has 
>been on my race car for around 20 years.
> 
> Either style of spring should work fine.
> 
> Chris Coker
> www.risensonracing.com
> 
> Original Message:
> -----------------
> From: Adam Bradley ambradley@attbi.com
> Date: Fri, 14 Feb 2003 09:17:17 -0800
> Subject: NISMO comp springs - how many coils should they have???
> 
> I have seen a bunch of pictures recently of comp front springs that have a
> large number of coils, such as the auction at
> 
>http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34200&item=2403085015.
> The springs I bought a couple of years ago from my Nissan dealer
> (supposedly NISMO comp springs) didn't have this many coils and were
> noticeably shorter than my stock springs that I took out of the car.  Then
> today I saw the pic at http://www.datsun.org/fairlady/June2001.htm that
> shows fewer coils more widely spaced, like my springs.
> 
> So which is right???
> 
> Adam Bradley
> '70 Datsun 1600 Roadster SPL311-28181
> '67 Datsun RL411 SSS sedan RL411-11321
> '66 Datsun PL411 sedan PL411-022447

///  datsun-roadsters@autox.team.net mailing list
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>