Woody,
Your best method of seeing how your regulator is working is to start the engine
and measure the voltage across the battery. You should see around 13.6 to 14+
volts when the engine is running. If the voltage is near 12 volts you are
either
not charging the battery, or the charge current available is very low.
Tom
69 2000
Portland, Oregon
dwoodru1@tampabay.rr.com wrote:
> All,
> How can I test the functionality of my voltage regulator? I suspect this is
> causing some problems, but need a little guidance. Thanks.
>
> Woody
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|