Michael and list,
lifted from the SP310 service manual and I assume these values carry
over to later models:-
Upper ball joint nut 15-18 ft-lbs
Lower ball joint nut 16-20 ft-lbs
Spring plate nut 25-30 ft-lbs
Upper arm spindle to cross member 35-42 ft-lbs
Lower link spindle bolt 25-30 ft-lbs
Nut upper ball stud with knockle spindle 43-51 ft-lbs
Nut lower ball stud with knuckle spindle 80-90 -ft-lbs
Spindle nut 30 ft-lbs then back off
1/8 turn
39 deg. C today with much of the Australian Capital Territory
(Canberra) under bushfire threat.
Regards,
Graeme Suckling
1965 SP310 - under construction DSOA Member # 112
1971 P510 4 door - daily driver, original owner, highly modified.
1972 P510 2 door - in storage.
1973 HS30/240Z - re-building to 2003 specs.
Adelaide, South Australia.
-----Original Message-----
From: owner-datsun-roadsters@autox.team.net
[mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of Teesun68
Sent: Sunday, 19 January 2003 3:06 AM
To: Roadster List
Subject: Torque specs for front suspension '69 SRL 2000
Greetings all,
Does anyone know what the torque setting should be for the front
suspension on a '69 SRL. Larry and I have been working on putting
together the
suspension on his 2000 and we do not have any data on that. We are
looking for
ball joint torque's and any other's for the bolts going into the
frame. Any
words of wisdom or e-links?
Thanks muchly as usual!
Michael
'69 1600 runner
'68 1600 resto
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|