I have a dead 67 SPL 311-14752 that I am trying to bring back to
life(rusty,not driven for 12 years) as a drive-around,not show car quality.
The schematic shows a power source that feeds only the temp gauge and the fuel
gauge. The temp gauge works when a lower resistance is substituted for the
sensor, but the fuel gauge does not. The sender is OK and the lead to the
gauge checks out.The feed to the fuel gauge shows the same cscillating voltage
that works OK for the temp gauge when checked within a few inches of the
gauge( inaccessible without removing the dash.)
All of which points toward a faulty fuel gauge as all other gauges work.
1. Am I missing something here?
2. Any handy-dandy way of curing my problem ?
At age 89 obviosly I am not anxious to dismantle the dash.
Thanks in advance. ................Joe
PS The emails are of immeasurable help.
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|