This looks terrific seeing how I am in the process of putting her back
together. Is there any chance the back end is also available? I would like
to replace every bolt on the car if possible seeing how just about every
bolt on my car was missing from PO when I got it.
Very much appreciated.
Kind regards
Tom Meacham
69 2000 09182
on 10/1/02 4:39 PM, Tim Waltz at printner@worldnet.att.net wrote:
> (I formatted the first one in Rich Text, and it converted a little messy.)
>
> Here's a list of bolt sizes for the front end, as best as I can tell
> (quantities are enough to do both sides):
>
> Lengths refer to the bolt shaft, threaded or unthreaded, not including the
> head.
>
>
> Lower Ball Joint (8 total with--my nuts were Nylock shaped with no nylon)
>
> 5/16-24 x 2"
>
> Lower A-Arm (8 total with lock washers and standard nuts--bolts to
> suspension x-member)
>
> 3/8"-24 x 1 5/16" (closest I could find was 1 1/2")
> approx 5/8" unthreaded
>
> Steering box and Idler box (6 total--2 with star lock washer, 4 with regular
> lock washers and nuts
>
> 3/8"-24 x 1 1/2"
> approx 3/8" unthreaded
>
> Lower A-arm coil spring "triangle" seat (8 total--8 lock washers, 4 nuts)
> 3/8"-24 x 3/4"
> completely threaded
>
> Upper A-arm (4 total with internal star lock washers)
>
> 7/16-20 x 1 9/16" (1 1/2" was as close as I could find)
> approx 3/8" unthreaded
>
> 2" bolt will fit with a Nylock nut on backside (I tried it)
>
> Upper Ball joint (8 total)
>
> 5/16-24 x 3/4"
> (actual bolt I removed had approx 5/8" length, but 3/4" should not
> interfere)
>
> Front Swaybar (4 total with lock washers)
>
> 1/4"-28 x 3/4"
> (actual bolt I removed had approx 5/8" length, but 3/4" should not
> interfere)
>
> Lower A-arm shock mount circle (6 total with lock washers)
>
> 1/4"-28 x 3/4"
> (actual bolt I removed had approx 5/8" length, but 3/4" should not
> interfere)
>
> Caliper mount bolts (4 total with lock washers)
>
> 1/2"-20 x 1 3/16"
> approx 5/8" unthreaded
>
> Spindle to Knuckle Arm (4 total)
>
> 3/8"-24 x 2"
> approx 7/8" unthreaded
>
> Spindle to Caliper Adapter (4 total)
>
> 3/8"-24 x 1 1/4"
> approx 1/4" unthreaded
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Archives at http://www.team.net/archive
> /// Send list postings to datsun-roadsters@autox.team.net
>
--
Landmark Creations International
A Manufacturer of High Quality Custom Inflatables
(800) 553-3593 - fax: (952) 895-0946
www.landmarkcreations.com
Let us make you a LANDMARK overnight!
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|