On the aluminum heads I use a 240Z thermo elbow with slight modifications
and dump the entire 1600 filling system. Much cleaner look and it works
well. The necks are about $8 new from Nissan.
Mike
----- Original Message -----
From: "Victor Laury" <vlaury@earthlink.net>
To: "Michael Ibarra" <MIbarra@DRL-USA.COM>
Cc: <datsun-roadsters@autox.team.net>
Sent: Thursday, March 28, 2002 11:30 PM
Subject: Re: Ever Think Of Replacing That Filler Neck On Your 1600?
> SoCal Local, Mike Ibarra has made up a custom filler neck for 1600's
running
> 2L Radiators. Prett cool looking, with the Datsun "D" cut into the top.
> Since the list wont accept his photos, please email Mike at
> MIbarra@DRL-USA.COM .
>
> Here's his post to the SoCalROC distribution list
> --------------------------------------------------------------------------
> We'll I'm going to try this just one's I have found a machine shop that
will
> do a short run of this units, If you have purchased a 2000 Radiator and
you
> ended up having three filler caps in your roadster this might just solve
the
> problem. He made this one as a sample, If any of you want's to purchase
one
> I can have him make about 7 of them. I bought the raw material and the
> machine time. He's charging $75.00 for each them I have attached a few
> photos this is a milled part, not casted have a Custom Look On Your Car.
> First 7 gets them please only one per person. I want other to have a
chance
> too. The dash is still being made at this time. It will have optional
> anodizing Solid Aluminum With functional Aluminum Glove Box.
>
> Mike Ibarra
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|