Does anybody have information about the Solex II cam? Specifically I am
wondering about the differences between it and the B-cam. What kind of power
output should I expect? Is there any modification required to the head or
pistons to use this cam? Will it work well with the stock compression ratio?
I got the 23x9.5x15 Hoosier slicks mounted on the Centerline wheels and
installed on Tetanus. I had to use wheel spacers and longer studs. The studs
are Moroso brand and I had to turn down the knurl a bit on the lathe to make
them fit the hubs. I tack welded the studs in the hubs to keep them from
turning while torqueing the lug nuts. I also had to cut the tops off the mag
style lug nuts so that the longer studs can poke through. I also had to drill
a hole in the backing plate of the rear drums to insert the longer studs. You
can see pictures of Tetanus with the slicks installed at my picturetrail
site.
http://www.picturetrail.com/gallery/view?p=999&gid=555552&uid=452047
Does anyone have reccomendations for air pressures on Hoosier R45 slicks?
Thanks,
Andy
/// datsun-roadsters@autox.team.net mailing list
|