OK, I figured it out. white/blue gives a good 12 volts with the car
off and the ignition on, nothing with the ignition off. I was able to
cram the positive lead of my multimeter into the plug and test each
wire.
--- Adam Bradley <ambradley@yahoo.com> wrote:
> I am adding a voltmeter to my car since I now have a GM alternator.
> I
> want to wire the voltmeter to an ignition switched wire. I have the
> lower dash panel and the steering column cover removed. There is a
> plug into the ignition switch with five wires - black/yellow,
> black/white, white/yellow, white/blue and white/red.
>
> Which wire is hot when the ignition is on? Is it OK to splice in
> here,
> or should I do it somewhere else? If somewhere else, where and what
> wire?
>
> Thanks,
> Adam
> '70 1600
>
>
>
> =====
> Adam
> '70 1600 SPL311-28181
> http://www.picturetrail.com/abend
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/
=====
Adam
'70 1600 SPL311-28181
http://www.picturetrail.com/abend
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
|