RE: Upper A-arm bushing?

["Brian Hollands" <bholland@hayes.ds.adp.com>]

If you don't have an impact gun don't fret.  I took mine apart without.
Just a good 1/2 drive and a good socket along with some elbow grease.  Worst
case, you can unbolt the shaft from the frame with the upper A-arm still
attached and take it to someone to pull apart.  I didn't have to go that far
though.  Keep your fingers crossed.
Brian


-----Original Message-----

Replace everything, as the shaft as well as the bushing wear in equal
amounts. You'll need a heavy duty impact gun to get out the old bushing out.