I am boring out the body and using oilite bronze bushings. On the 2L carbs
(not the 1600 or the 240Z carbs) they narrowed down the shaft inside the
bushing and used some type of plastic packing. I am replacing the plastic
packing with O-rings.
keith
> Might be the same thing but Apple Hydraulics rebushed my throttle shafts
> with a nylon/Teflon bushing. The shaft bore was drilled way oversize and
> the bushing inserted with the new shafts. It's worked extremely well for
> years.
> Brian
>
> Just ordered some O-rings to replace the funky seals
> that the 2L SU uses on the throttle shaft. Should provide a superior seal
> and
> last a long time.
>
> thx,
> keith williams
|