datsun-roadsters
[Top] [All Lists]

Re: no tail running lights

To: roadsterdude1600@yahoo.com, ambradley@yahoo.com, Ofarrell.Fergus@hitco.com,
Subject: Re: no tail running lights
From: "Richard Rudden" <sequoia12@hotmail.com>
Date: Sat, 31 Mar 2001 09:12:30 -0800
Sorry Mike, but I would suspect the combo switch, loose dirty contacts or an 
overcenter spring thats broken/slipped qut of place.

Richard R
69 2000

----Original Message Follows----
From: Mike Harper <roadsterdude1600@yahoo.com>
Reply-To: Mike Harper <roadsterdude1600@yahoo.com>
To: Adam Bradley <ambradley@yahoo.com>,   Richard Rudden  
<sequoia12@hotmail.com>, Ofarrell.Fergus@hitco.com,   
datsun-roadsters@autox.team.net
Subject: Re: no tail running lights
Date: Sat, 31 Mar 2001 06:08:51 -0800 (PST)

A related, if different question:  My high/low beam
switch has become erratic.  bounces back and forth
between high/low without warning, (turn the wheel,
etc.) Now will only stay on high, but can pull the
stalk back to get low (must hold in position).  I
suppose the stalk needs pulling/cleaning/rebuilding,
but I do not look forward to all the hassle.  Should I
check relays & all wiring connections first, or is it
definitely in the switch?  I would bet several of you
have encountered this...

Mike Harper
'66 1600
Charleston SC
--- Adam Bradley <ambradley@yahoo.com> wrote:
 > Just want to confirm that my lowbeam/highbeam is
 > working properly.
 > When I have the turn signal stalk pulled towards me,
 > it is on high
 > beams, when I have it pushed forward, it's low
 > beams, which is
 > backwards of all other cars I've owned.
 >
 > The red indicator in the speedo agrees with the
 > signal position.
 > Oddly, when i got the car the hole in the back of
 > the speedo for the
 > highbeam indicator was filled with dirt!
 >
 > Adam
 >
 > --- Richard Rudden <sequoia12@hotmail.com> wrote:
 > > Fergus,
 > >
 > > I've had exactly the same happen. What I'd check
 > first are the fuse
 > > clips on
 > > the "Park. Tail" fuse, 2nd one up in the right
 > bank. This is a high
 > > current
 > > draw connection for long periods and while the
 > fuse shows good, the
 > > brass/bronze clip expands from the heat and looses
 > it connection to
 > > the fuse
 > > end.
 > > Hope this works for you.
 > >
 > > Richard R
 > > '69 2000
 > > Santa Clara Ca.
 > >
 > >
 > > ----Original Message Follows----
 > > From: "Ofarrell, Fergus"
 > <Ofarrell.Fergus@hitco.com>
 > > Reply-To: "Ofarrell, Fergus"
 > <Ofarrell.Fergus@hitco.com>
 > > To: "'roadster.netlist'"
 > <datsun-roadsters@autox.team.net>
 > > Subject: no tail running lights
 > > Date: Fri, 30 Mar 2001 09:59:19 -0800
 > >
 > > I drove my car all day, but when I came out and
 > turned it on and
 > > turned on
 > > the headlights, the red light on the dash (bottom
 > center of the
 > > speedo) came
 > > on, no gauge lighting, and my tail running lamps
 > don't work (all of
 > > them).
 > > All fuses are fine. Switch related?  All the wires
 > are status quo on
 > > the
 > > switch back, nothing out of sorts in trunk wiring.
 >  Suddenly all I've
 > > got is
 > > a daytime runner, good thing daylite savings time
 > is soon.
 > > Fergus O
 > > 69 2000
 > >
 > >
 >
_________________________________________________________________
 > Get email at your own domain with Yahoo! Mail.
 > http://personal.mail.yahoo.com/?.refer=text
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/?.refer=text

_________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>