Ryan Roswell Bird wrote:
> Hey guys (and gals?),
>
> Anyway, does anyone have any advice / tips on how to remove the door glass,
>both the vent and the window.
Ryan,
If you haven't taken the door panel off yet, do that first.
There are 3 screws in the door for the vent window.
1 at the upper corner and 2 along the shaft of the vent window channel.
There are other screws there too so look carefully.
The vent window is the front part of the main door glass channel.
Roll the window up enough to see the bottom of the window through
the larger rectangular hole in the door and find the screw that holds the
plastic stop. Un-screw it and roll the windowup further until the regulator
arm comes out of the channel. Pull the glass the rest of the way out.
Then pull the vent window out. Should not be too much trouble unless
everything is rusted. If rusted spray some type penetrating oil on it first.
I am lucky with mine, Hardly any rust. Oh, a little but not much.
Bob
67.5
Moscow
|