Rob,
All the windshield and vent window frames were plated on both sides as it's
almost impossible to plate only 1 side. However on the 67.5s the insides
were not polished smooth but had an irregular surface.
Mike
----- Original Message -----
From: <Robert.Long@CSDInc.com>
To: <CDADDYO@prodigy.net>; <datsun-roadsters@autox.team.net>
Sent: Tuesday, March 06, 2001 10:51 AM
Subject: RE: 67 & 67.5 1600 differences
> Craig,
>
> I'm no expert, but I do know a few of the difference between 67s and
67.5s:
>
> - The guages on the 67.5 have a black trim ring around them
> - The windshield trim was painted a dull silver over the chrome. I
cleaned
> the paint off, and it's chrome now
> - I think the guages are different too. The 67.5 has a combined oil/temp
> guage
> and a combined amp/fuel guage.
>
> I'm sure there are other differences too...
>
> Here's what I have for SPL VINs:
>
> 65 thru 67 = 00001 thru 11000
> 67.5 = 11001 thru 17000
> 68 = 17001 thru 24000
> 69 = 24001 thru 27000
> 70 = 27001 thru .....
>
> Robert
> 67.5 1600 (SPL311-14792)
> 83 280ZX
> Albuquerque
>
>
> -----Original Message-----
> From: Craig Odell [mailto:CDADDYO@prodigy.net]
> Sent: Monday, March 05, 2001 9:38 PM
> To: datsun-roadsters@autox.team.net
> Subject: 67 & 67.5 1600 differences
>
>
> Can anyone tell me if the 67.5 SPL311 came with the same dash as the 67.5
> SRL311?
> Did the 67.5 SPL311 get the front fender flare increase over what the 67.5
> SPL311 had?
> What are some other differences between the 67 SPL311 and the 67.5 SPL311?
> Does anybody have the serial # cut-off between these 2 models?
> Sorry, I know this stuff comes up when ever anyone buys a new roadster.
:>)
>
> Craig Odell
> 68 2000
> 67 or 67.5 1600 (?)
|