In a message dated 2/18/01 4:17:29 AM !!!First Boot!!!, PLETCH5@aol.com
writes:
<< The front comp springs only lowered my car 3/4 to 1 inch,thats why I'm
trying
find a way to get the car about 1 inch lower. >>
Hey Ken,
Be careful about lowering to much. Especially if you plan to track the car.
You may end up bottoming out the spring which may out you on the bumpstop.
If you are still in the turn you are more likely to break traction in the
front and end up understeering to the outside of the track.
Remember my Orange color '66 1600? Well, I installed a set of comp springs
on it too. I made the mistake of not cutting the bumpstops enough and the
roadster would understeer alot until it was corrected.
Michael <A HREF="http://members.aol.com/calspeed1/motorsports.html";>"Calspeed"
</A> Carion
|