Hello,
I have this exact same set up on my roadster. I will also be
at shasta this year(if I EVER get rid of this hang over). Jim is
right that the setup works great and you do hook it up to the MSD
like they are points.
But feel free to come by and check out my car. It'll be the
white 69 2000 with flames.
Daniel 69 2000
SF CA
> Trying to install my Pertronix Ignitor, and have a few questions.
>
> Has anyone run this with an MSD ignition? The instructions
> say to run the red wire to the positive side of the coil. With the
> MSD, there is no direct connection. The wire from the distributor
> runs directly to the MSD ignition box. Do I just connect the red
> wire to the white one leading to the ignition?
>
> There is currently no negative wire from the distr. to the coil. Do I run
> the black wire from the Pertronix unit directly to the negative side
> of the coil?
>
> It looks like the vacuum advance has a pin in it that goes into the plate
> the points are mounted to. The hole in the Pertronix unit does not line up
> with the vacuum advance pin. Is this still used?
>
> Is there anyone going to Shasta with this setup? It would be nice to
> eyeball the installation.
>
> Any advise would be appreciated.
>
> Thanks,
>
> Kim
> 68 2000 CSP
> NOWROC
> Hyped about Shasta!!!
>
|