You can use a distributor off a R16 411. Of course you will not
have the tachometer drive. ;-(
As to my 'other swap' of getting a distributor off a rear wheel
drive Dasun 210 (1980 vintage), I use PARTS of that distributor,
with the SHAFT of the roadster distributor. Machine a couple of
items (simple screw and thrust washers)... viola. Electronic
Ignition distributor for the R16/U20. No a simple swap, but
doable.
For most folks I recommend keeping a stock (w/ 67 model year
advance weights & springs) distributor and using a MSD-6A
ignition module. If the electronic module dies, you still have
a stock point distributor (just rehook up the ballast resistor).
Cheers,
Tom
>
>Are here any distributor swaps to be made in the case of a 67 1600? And
>please don't tell me you can use the one off a Sylvia or a Bluebird because
>there aren't any of those up here either. Thanks.
>
>Dan Yates
>67 1600
>
>
|