In a 1600,
Is it kosher to resurface the lifters? Is there enough hardness to
'em? Years back (7) I had mine done, and the cam reground. So far it
seems to be holding up alright, but I havn't measured the lift recently,
either... I HAVE been wrasslin' with noisy rockers (well, OK, checking
the adjustment every 500 miles, to discover that they're adjusted
correctly) in the vain hope that they'll SHUT UP! One of these days,
I'll get a new rocker shaft assembly...
Toby
Philip Erickson wrote:
>
> Either way you go with the cam, have your lifters resurfaced. Most lifters
>are
> convex when new and wear along with the cam. A quick and dirty way you can
> check for wear is by placing the two bottoms together and making sure they
> "rock".
|