Hi Michael,
Les made a plexiglass one for the Bondurant 2L. He may still have the
tracings or could possibly fabricate another one for you. It was the same
process as Jerry describes in which a torch was used to curve the ends.
Joseph Roach
65 1500
San Diego, CA
At 08:11 PM 9/13/99 -0400, Jsk977@aol.com wrote:
>Michael,
>
>I made a plexiglas screen for my 67.5 when I went racing years ago. I did
>have to drill into the metal, but on the thin flat panel that the bottom of
>the windshield rests on. When I ever put the windshield back on, the holes
>should be easy to seal , and then they will be covered by the windshield
>itself.
>
>I mounted small aluminum angle brackets to the holes and then rivited the
>brackets to the plexiglas. Used a propane torch to soften the plexiglas at
>the ends, curved it around, and rivited in place. You can see a picture of
>it at Greg Valezza's 67.5 registry - SRL311-00099.
>
>
>Jerry Krakauer
>SRL311-00099
|