Mike,
Someone went to a lot of trouble to put your distributor together. The
roadster shaft will fit into the 310 housing without modification. It is
only necessary to make up a spacer to sit on the top of the shaft and use a
longer screw for the cam. All the parts will fit. Actually the part that
you need to watch out for is the mechanical advance because of the various
advance cams used in the donor cars. The dist from a 210 (B310) is easy to
get and use. Wiring is really easy.
Stan
==========
At 11:43 AM 8/16/99 -0700, Mike Poorboy wrote:
>Hi,
>Is there anyone else out there that is using a Datsun electonic ignition
>
>conversion.
>
>The end was cut of ,and the distributer drive, and the oil pump drive
>shaft from a 2 liter were welded back on.
|