Re: Polyurethane bushings

To:	chapman-era@autox.team.net, gusmach@shore.net
Subject:	Re: Polyurethane bushings
From:	cak@dimebank.com (Chris Kantarjiev)
Date:	Tue, 2 Feb 1999 09:20:33 -0800

If you're going to machine something, I'd recommend black delrin rather
than urethane... also available from places like McMaster-Carr
and MSC. I typically take a stock rubber bushing, remove the center
steel sleeve and reuse it.

<Prev in Thread]	Current Thread	[Next in Thread>
Polyurethane bushings, Gene_Carter Re: Polyurethane bushings, Keith Gustafson Re: Polyurethane bushings, Chris Kantarjiev Re: Polyurethane bushings, Chris Kantarjiev <= Re: Polyurethane bushings, Chris Kantarjiev RE: Polyurethane bushings, Dave Billings polyurethane bushings, Keith Gustafson Re: polyurethane bushings, David H Putscher Re: Polyurethane bushings, Derek Harling Re: Polyurethane bushings, Chris Kantarjiev Re: Polyurethane bushings, Tim Engel Re: Polyurethane bushings, Tim Engel

Previous by Date:	Re: Polyurethane bushings, Chris Kantarjiev
Next by Date:	Re: Polyurethane bushings, Chris Kantarjiev
Previous by Thread:	Re: Polyurethane bushings, Chris Kantarjiev
Next by Thread:	Re: Polyurethane bushings, Chris Kantarjiev
Indexes:	[Date] [Thread] [Top] [All Lists]