woops try again it should work now
What I did for wire lengths is when I laid out my harness board,I traced my
dash onto the plywood and drove nails in for all the gauges and switches
etc. Most other parts in the front of the car can be tape measured. Leave
extra wire for service loops etc!!! I wired the tail lights and such in the
car, it worked out neater that way.
At 09:43 AM 8/27/97 -0700, you wrote:
>Keith,
>
>Thanks for posting the list. But, my browser can't get wirn.csv. I get a
>message that:
>
>"You have tried to go to an address that is not valid for Shore.Net"
>
>Any ideas? By the way what about length of each wire? Is that done on
>the car or something? Again, thanks for the list.
>
>Ken Landaiche
>
>
>
>>----------
>>From: Keith Gustafson[SMTP:gusmach@shore.net]
>>Sent: Tuesday, August 26, 1997 5:36 PM
>>To: lotus-cars@lists.best.com
>>
>>Alright, I finally got my wiring run list together with a brief unreadable
>>and thoroughly useless instruction sheet. They can be found at:
>>
>>http://www.shore.net/~gusmach/
>> the file names are wirl.csv
>> wirn.csv
>>and instructions.txt
>>
>>wirl is the list in order of the "from" column
>>wirn is in numerical order[as entered into my computer]
>>
>>there aren't any links form the actual site to the pages, just type the
>>whole URL and save the file from your browser, they seem to come out OK. I
>>have a copy of the lucas standard wiring colors if anyone is interested, i
>>can scan it in to my computer and post it[the usual delay of course]
>>
>>
>
>
|