>From my spare 61 Olds F85 service manual
"Note: for bolts going into aluminium some use PN 980131 lubricant, some oil
and some
sealant. consult text."
These is only mention in text to use one drop of oil for spark plug threads
See answers below in your text
Also have 62 service manual which I did not check for values but assume that
all 3 years
should have same torque values.
Regards Al
James Nazarian wrote:
>
> Can anyone give me torque numbers for the
> flywheel to crank bolts------85 50 95 ft-lbs
> preasure plate to flywheel bolts-----14 to 27 ft-lbs
> and the belhousing to engine bolts-----30 to 35 ft-lbs
> all on a 63 Buick Special 215 with factory 4-sp and bellhousing
>
> TIA
> --
> James Nazarian
> 71 MGB roadster
> 71 MGBGT (the one that is supposed to be a v8)
> 01 Impreza 2.5RS
>
> "Given a conflict, Murphy's law supercedes Newton's."
> -Anon
>
> "Nothing good has ever been reported about the full rotation
> of a race car about either its pitch or roll axis."
> -Carroll Smith
|