--_-==14D9B6234983==-_
charset=us-ascii
Lorne,
I'm making an assumption now....do you have a problem with over rich mixture.
and cannot bring it down???....CO at 6 & Hydrocarbons at 1200ppm
If so The temp sensor behind the Timed thermo/startup sensor at the front of the
block could be your problem. and its cheap to replace.
Regards
Steve
____________________Reply Separator____________________
Subject: RE: Air Flow Meter (Flap type)
Author: briene@worldonline.nl (Adriaan Briene)
Date: 08/03/00 20:13
-----Oorspronkelijk bericht-----
Van: Lorne M. Goldman [SMTP:lmg@gomog.com]
Verzonden: woensdag 8 maart 2000 19:47
Aan: BOP-list (E-mail)
Onderwerp: Air Flow Meter (Flap type)
Would anyone have diagrams of technical data on the Rover (Bosch
L-Jetronic) airflow meter (flapper) used on early Rover 3500 EFIs..until
replaced by the hotwire airflow meter?
Any help would be appreciated.
Lorne.
You can find more info on the airflow meter and on the
Lucas EFI system in the techtalk section of this site:
http://members.tripod.com/~RoverSD_1/
Adriaan Briene
Wierden, The Netherlands
--_-==14D9B6234983==-_
name=wssinfo.txt
Content-Disposition: attachment;
filename=wssinfo.txt
"WorldSecure <meespierson.co.uk>" made the following
annotations on 03/09/00 09:06:49
------------------------------------------------------------------------------
[INFO] -- Access Manager:
This E-mail has been scanned for Virus and Content by WorldSecure Server.This
E-mail and any file transmitted with it are confidential and are intended solely
for the use of the addressee. The content of this E-mail may have been changed
without the consent of the originator. The information supplied must be viewed
in this context. If you have received this E-mail in error please notify our
helpdesk by telephone on +44 (0) 171 444 8444. Any use, dissemination,
forwarding, printing or copying of this E-mail or it's attachments is strictly
prohibited.
==============================================================================
--_-==14D9B6234983==-_--
|