Dave, I've used both the Rhodes and the Crane version and both worked. Call
Summit and they can tell you what part number you need. John
David Kernberger wrote:
> 9/21/99
>
> It's been awhile since I have posted anything to the lists so I
> figured it was time for another of my questions. I have not been able to
> find out for sure if any of the Rhoads Lifters will work in the Rover/BOP
> engines. I am talking about the "fast-bleed" lifters which reduce valve
> lift and duration at idle and low speeds by partially leaking down. This
> is supposed to make a hot cam act more normally at ordinary speeds, yet
> allow it to bring on its potential as engine speed increases. More vacuum
> at idle and better fuel mileage overall are also claims. Rhoads is the
> inventor of these as far as I know. So, does anybody know which part
> number of Rhoads lifter will work in these engines? Any idea of where to
> obtain them and approximate cost would also be appreciated.
>
> TIA.
>
> Cheers,
> Dave Kernberger
|