Paul-
I don't have a drawing, but I have a 1995 4.2L Rover bolted to a 1962 Buick
bellhousing. Everything lines up including the locating dowels. Will that
solve your problem?
Jim Stuart
Paul Johns wrote:
> We need a copy of a [factory] drawing of the spacing of the bolt pattern
> of the rear engine face / bell housing of the Rover and or Leyland V8 ci
> so that we can positively identify if it is identical with that of the
> Buick 215 ci V8 for a project we are doing.We have a copy of a factory
> drawing of the Buick We are told they are the same, and that bell
> housings and engine blocks are interchangeable,and we believe this, but
> we gotta get it right. Any help would be appreciated. Paul.
|