buick-rover-v8
[Top] [All Lists]

Bearing replacement on a Rover v8.

To: buick-rover-v8@autox.team.net
Subject: Bearing replacement on a Rover v8.
From: "Stuart Goggin" <SGOGGIN@au.oracle.com>
Date: 29 Apr 99 08:50:32 +1000
--=_ORCL_17176410_0r0

Hello All,

I have a rover v8 with a knock that I suspect to be either main bearing or
big end related.   The rest of the motor is probably OK,  ie CAM and lifters
etc.  The oil pressure is good when cold but the warning light comes on when
hot idling.   The knock is apparent under heavy load,  for example in third
up a hill.   There are no noises at idle or revving in neutral.    I suppose
it could also be engine mount related,  but the oil warning light leads me
to think a main bearing.

But as I am in the process of tidying a few things up on the car (which has
quickly turned into a full rebuild :-)  )  I would like to do a bit of a
quicky on the motor and replace the bearings with it in situ. I have the
sump off, and have had a bit of a play with the conrods and main bearing
caps,  unfortunately nothing is obviously loose.   Sure this is a bit of
sideways play in some of the conrod bearings, but maybe this is normal....  
I will be replacing all of the conrod bearings, but:

1.      Is it possible to replace the main bearings with the motor in the car 
(83
Range Rover).  Or at least some of them.   I would plan on replacing them
with standard sized bearings.
I realise this would only be possible if the journals on the crankshaft are
not damaged.   But suppose they are,  would simply replacing the bearings
get me another 20,000 k's out of the motor?  I have heard that it is
possible to slide the top shells under the crank shaft.   Also is it easy to
get at the front and rear bearings,  with their associated seals?

2.      The nuts on the conrod bolts are a weird shape,  they sort of look like 
a
TORX pattern.  But I cannot find anyone that sells a socket to fit.  Any
ideas on where to get one in Melbourne Australia.  Or even what their
official pattern and size is?


Thanks for any advice.

Stuart

--=_ORCL_17176410_0r0
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==

--=_ORCL_17176410_0r0--


<Prev in Thread] Current Thread [Next in Thread>