I read in David Hardcastle's book that the P76 pistons were dimensionally
identical to the 3.5 Rovers - is this not the case?
-----Original Message-----
From: Peter Kent [mailto:pkent@skynet.net.au]
Sent: Wednesday, 14 April 1999 18:49
To: David Kernberger; tjoyner
Cc: buick-rover-v8@autox.team.net; mgb-v8@autox.team.net
Subject: Re: Rover crank specs-reply
I have measured a 3.5 litre P5B (10.5/1 comp) piston, it's compression
height was 1.865"
(and a P76 piston was 1.375" (different block height, stroke, rod length
and 9/1 comp)).
|