the one issue I found when I powder coated the dash and center insert. I
needed to be sure to ground to something other than the coated surface (or
grind off the pc) otherwise the ground was hit/miss....
I covered in vinyl so can't help with the cubby question.
Carl
1961 TR3A - TS81802LO
mysite.verizon.net/cfmtr3a
Tampa, Florida
On 01/09/14, wbeech@flash.net wrote:
I know I am not the first to think of trying this so I would again implore
the List for BTDT wisdom.
I am thinking of either painting or powder coating the dash on my current
TR3 project, but curious as to what others have done with the cubby box
door. So far, my only solution is making an aluminium panel to replace the
vinyl covered wood that is currently there.
All thoughts and pictures appreciated,
Cheers,
Bill
Bill Beecher
'58 TR3A TS/30766L "Tarbaby"
'62 TR3B TCF/2549L " Aunt B" (in rehab)
<http://www.triumphowners.com/1566> www.triumphowners.com/1566
'68 Land Rover Series IIa 88" "The Beast"
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
_______________________________________________
British-cars@autox.team.net
Archive: http://www.team.net/archive
|