Hello List,
Having some problems with erratic readings from my new sending unit recently
acquired from BPNW. I have checked everything to be sure the connections
are tight, even ran an additional ground wire from the gauge to the dash
panel.
Still no improvement, so I wrote to BPNW and they say I should have a
Voltage Stabilizer pn=148876D mounted behind the gauges. I don't recall
anything like this in any TR3 documentation. When I look this part up on
the BPNW web site it shows to be an MG part, but BPNW insists this is what I
should have for the Triumph.
Has anyone installed one of these on a TR3?
http://www.bpnorthwest.com/.sc/ms/bdd/ee/9955/Voltage%20Stabilizer
<http://www.bpnorthwest.com/.sc/ms/bdd/ee/9955/Voltage%20Stabilizer>
Bill Beecher
'58 TR-3A TS 30766 L aka "Tar Baby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
_______________________________________________
British-cars@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|