> My question is: What connections do I use to run the motor for a few
> minutes to be sure everything is OK. I don't seem to be able to find the
> right combination and the manual is no help.
Bill, did you not get my reply last Saturday?
If making the connection to terminals 1 and 2 does not make the motor run
continuously, then there is something wrong with your motor.
Terminal 2 normally gets power from the green wire (regardless of positive
or negative ground); while Terminal 1 gets grounded by the switch
(black/green wire) to make the motor run continuously. The internal park
switch connects terminal 1 to ground until the motor is in it's "parked"
position.
This is assuming you have the correct motor for a 58 TR3A. Earlier TR2-3
used a different motor without a park switch; but it should still run
continuously with power applied between the two terminals.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
British-cars@autox.team.net
http://autox.team.net/mailman/listinfo/british-cars
|