Re: TR7BFH Inner Ball Joint installation

[Lee Daniels <DANIELS@alchem.chem.tamu.edu>]

Joe Curry writes:
>[...] The reason is that if there is slop in the rack, the wheels
>would not be consistently spaced to start with.  
>[...]
>just eyeball it and then take it to the alignment shop! 

If there is slop in the rack, then the alignment shop won't get
it right either.


   Lee M. Daniels         Laboratory for Molecular Structure and Bonding
   daniels@tamu.edu                                 Texas A&M University
   '74 TR6  '88 XJ6                      http://www.automate-it.com/Lee/