From: Terry Murphy tmurphy@admin.acadiau.ca
Subject: TR6 trailing arm frame repair
My TR6 had this promlem (don't they all) so I took it
to a welding shop I could trust and they replaced the
whole section. Then I took it to an alignment shop that
I hoped I could trust and they inserted some shims between
the new frame and the control arm to correct the alignment.
That was 15 years ago for about $100.00 and I've been
driving ever since.
Good luck John I hope you have the same results!
Terry Murphy
Acadia University
Wolfville Nova Scotia
Canada BOP 1XO
tmurphy@admin.acadiau.ca
1970 TR6
|