On Wed, 18 Jan, pfoxtrot@gate.net wrote:
> two square section 'O'rings that are gonzo on my unit.
> I've seen replacements for the entire unit ($$$$$) but
> was wondering if anyone knew of another source or has
> specs on the o-rings themselves.
I've found that a good source for o-rings of any size or
type is your local bearing supply house. Bring the old
ones (and if possible the part they reside in, to check
seal) and the salesman should find a very close, if not
perfect, match.
Just my 2 cents,
Dave Williamson (silikal@aol.com)
|