to pschauss@aol.com
re healey trafficator
Boy did I mees up and sent a reply to the entire list
as individuals instead of just to the list. I and my bank
account are truely sorry about that.
But, anyway, in case you haven't recieved my suggestion here
we go again.
Go to your local autoparts store and purcahse a six to seven
foot section of steel brake line with 3/8 inch o.d. Use a
dremmel cutoff wheel to cut a 1/8 inch wide slot on one end
for a distance of about 5 and 1/2 inches in length (I
think).
Debur the pipe inside and out. Buff with some steel wool
and youv'e got your trafficator for about $12.50. (silver
solder the two tubes together if nescessary, but usually a
pressure fit will suffice.
again apologies for clogging up the net.
FISH
|