Phil Jones writes:
> Can any US spec TR6 owner tell me what the compression pressures ought to
> be. Mine vary between 130 and 145 lb/sq in. I was expecting a much higher
> figure, am I right?
> 1975 TR6 (lhd)
Phil, I, too, recently tested compression in my '74 TR6. As far as I
know, it is a stock US-spec motor. I found from 110psi to 128psi in the
cylinders. However, the engine runs extremely well, and seems to have
plenty of power. I do now know what the "correct" figures are.
--ken
Kenneth B. Streeter | ARPA: streeter@sanders.com
Lockheed Sanders | UUCP: ...!uunet!sanders.com!streeter
PTP2-A001 |
65 River Road | Voice: (603) 885-9604
Hudson, NH 03051 | Fax: (603) 885-0631
|