Use the oil gallery that runs along the LH side of the spit block for
your rocker feed pipe. This gallery feeds the oil pressure switch and
fool pump. Near the fool pump there should be a 5/16 hex head bolt with
a copper washer under it. This will be mounted directly into the gallery.
Take your lower pickup point here. The upper mounting point will be on the
rear left side of the cyl. head. Here also is one of these hex head "plugs".
It is toward the top. This goes to a passage that feeds the rocker assembly.
I hope this helps.
Greg Meboe MEBOE@wsuvm1.csc.wsu.edu
Dept of Mechanical and Materials Engineering
Washington State University Pullman, Wash.
67 Spit-6 (Daily) 74 TR-6 (In Progress)
|