MGB Wiring

[COSTICH_ALAN/HPATC1_01@i3125ent.atl.hp.com]

Mark Schmitz:

The main wiring harness is grounded to the body just under
the fuse block on the curbside inner front wing. One single
black wire drops out of the harness and is screwed to the
wheel well with a phillips (pozidrive?) screw. It may be
under the harness, so will take some searching. The rear
ground is indeed in the boot and you will note that the fool
pump is on the same ground point as the rear lights.

Sorry, it may not be One single wire.

Alan