re: air tools...buy a good 1/2 inch impact...invaluable for
loosening the 4 or 5 nuts/bolts on a mini torqued to 150ft lbs or so.
a good air blower will be used next most often.
next a die grinder with cut off wheel attachment. This is VERY
important if you have a race car. Trust me on this one.
Lastly, an air saber saw is real nice to have, although not
critical..
Anyone have any good sources for inexpensive moisture traps?
Re: Rob Reilly's comments...there is a lavendar coloured Muntz Jet I
have seen driving around in the northwest suburbs of chicago. (BTW,
the Muntz Jet was named after the fellow who produced them after he
took over production from Kurtis, Chicago Industrialist "Madman"
Muntz.)
Jim
jfuerstenberg@dcmdc.dla.mil
or jfuerstenberg@zz-link.dcmdc.dla.mil
|