|Date: 10-2-92 10:55am
|From: Dean Zywicki:dcrt:nih
| To: {british-cars@autox.team.net}:INTERNET
|Subj: Leaning midgets
------------------------------------------------------------------
Yesterday when I got home, I jacked up the front of the car and layed
underneath it for a half hour or so. I noticed a few things, the coil
spring on the passenger side was bending while the one on the drivers
side was straight. I also noticed that the bolts which attach the A-arm
to the frame were not located right on the passengers side. The round
hooked washers were out of their locating holes. So, I loosened the
nuts and jacked under the pan and put the washer things in the the
holes. When I lowered the car, the lean was gone. I was amazed that
such a small thing could cause such a huge problem. So, now I can think
about tires again.
Dean
|