Scott Fisher (scott@psy.uwa.edu.au) writes:
> What tips can anyone give me for replacing "core plugs"?
According to Cars & Parts magazine, you do this:
Use a hammer and punch to knock in the plug at the edge of its flat face,
up against the flange that holds it in. This should push in the metal some-
what, simultaneously pulling a part of the flange away from the side. Grip
the flange with locking needlenose Vise-Grips or similar and yank it out.
I have not tried this myself. ;-)
Andrew C. Green
Datalogics, Inc. Internet: acg@dlogics.com
441 W. Huron UUCP: ..!uunet!dlogics!acg
Chicago, IL 60610 FAX: (312) 266-4473
|