RE>Re: MG Midget Clutch Releas
From: Glenn Stauffer
> On another subject, I'm derus ting all the suspension bits using a
>wire
> brush, steel wool, and acid.
>
>Eastwood sells a nice wheel for use with a drill that's basically
>looseweave scotchbrite plastered with silicon carbide. Really good at
>getting anything off, leaves a finish like 80 grit sandpaper.
**** This sounds like the "Metal Stripper Wheel". Made by 3M. Available at
better hardware stores everywhere. My favorite, I've bought them by the
*case*. Goes through paint, rust, bondo, *tar*.
- Jerry
|