british-cars
[Top] [All Lists]

Re: Nylatron bushings

To: ian@centric.com (Ian Macky)
Subject: Re: Nylatron bushings
From: "Chris Kent Kantarjiev" <cak@parc.xerox.com>
Date: Thu, 30 Jul 1992 14:52:34 PDT
Try Ken Gillanders or British Parts NW:

Name:        Ken Gillanders
Company:     British Frame and Engine
Address:     4831 Ryland Avenue
             Temple City, CA 91780
Phone:       (818) 443-0939 work

Name:        British Parts NW
Address:     4105 SE Lafayette Highway
             Dayton, OR 97114
Phone:       (503) 864-2001
             (503) 864-2081 fax

At worst, there's TriumphTune, but they only offer nylatron for the
front, uprated rubber (shore 70) for the rear.

Name:        Triumph Tune
Address:     22-28 Manor Road
             Richmond, Surrey
             England TW9 1YB
Phone:       (+44 81) 948 6668
             (+44 81) 940 9268 FAX

Most of these folks will sell you urethane instead of nylatron. Use
Aqualube to lube the steel center bushing (on the urethane side, use
antiseize on the inside to keep it from rusting to the bolt) to keep
the squeaks down (get it at your local
boat supply place).


<Prev in Thread] Current Thread [Next in Thread>