british-cars
[Top] [All Lists]

GT6 historical data

To: british-cars@autox.team.net
Subject: GT6 historical data
From: DANIELS@LMSBV2.TAMU.EDU (Lee Daniels/TAMU-LMSB Systems)
Date: Thu, 12 Dec 1991 20:03:45 CST
What with all the talk about engine swaps and the original post regarding 
Spitfires and GT6's, here's a bit of history regarding the original GT6 
project:   (Taken unashamedly from the _Guide_to_Purchase_&_D.I.Y._-
Restoration_of_the_Triumph_Spitfire,_GT6,_Herald,_&_Vitesse_, by Lindsay
Porter and Peter Williams) (Whew)

OK, this is long, so don't waste too much of your boss's time reading it...
(Yeah, I'm doing this from home)

"The GT6 was not a planned addition to the range...Standard-Triumph really 
did not have the production space to seriously consider expanding; so 
despite the hints and speculation from outsiders they firmly ignored the 
possibility of a "Spitfire-6".  They did, however, consider ways of keeping 
the Spitfire in the forefront of its particular market and Michellotti was 
asked to design a fastback body for it.  His resultant design added far too 
much weight to the car so the idea was shelved. The fastback body was in 
fact fitted onto a Spitfire chassis in Turin, christened the Spitfire GT, 
and driven home where it joined the small band of experimental one-offs 
used by a few members of the company.  The pleasure the car gave to those 
that drove it worked an insidious magic and the Spitfire GT project became 
official policy in 1964.  The decision to turn it into a six-cylinder car 
was the result of progress with the up-grading of the Vitesse to a 1998cc.  
It was a bit of a squeeze getting the 1998cc six-cylinder engine into the 
Spitfire's engine bay, but by dint of creating a rather compiicated 
cooling system they managed it.  The GT6's debut was in 1966, a few months 
earlier than the Vitesse 2 litre; which, like the true parent it was, 
paused in the wings to enjoy the accolade!

"The car was beautifuly finished from inside to out. It was fully carpeted 
with a walnut veneer facia board and swivelling quarter lights at the front 
- the fixed quarter-lights used during development had tended to be sucked 
out at speed - and hinged quarter-lights at the rear. The elegant Italian 
design with its hatchback and two seats only, was a classy small Grand 
Touring car, even the rocker box was chrome plated.

"The car was well received and though it never achieved the production 
figures of the Spitfire it sold steadily.  The inevitable bug bear of the 
independent rear suspension raised its head again, though mainly in the 
technical press.  The general public did not seem to concerned and in the 
States, where the car was very well received, there were no complaints. The 
rear suspension had in fact been modified for the GT6 and the company was 
seriously trying to find engineering time to concentrate on the problem. 
This they eventually managed, and when, in 1968, the GT6 Mk2 took over, it 
was fitted with an advanced lower-wishbone rear suspension layout; 
double-jointed shafts located by a spring at the top. The effect on the 
handling of the GT6 was revolutionary - no more cause for complaint! The 
MK2 also acquired a new cylinder head, borrowed from the TR5, (giving 
potential for the engine to become a 2498cc, an advantage never utilised), 
but resulting in an increase of bhp from 95 to 104.  Despite the formation 
of British Leyland, no attempt was made to rationalise the range of sports 
cars for sale under the new umbrella - the Spitfire, the MGB, the TR6, 
Stag, MG Midget, the GT6 and Austin-Healey Sprite - all continued to share 
the market.  The real cloud on the horizon was in fact, the increase of 
legislation, in the United States, on safety and exhaust emission. Taking 
these facts into account, the intended full re-styling of the GT6 was 
modified (as with the Spitfire). Internal facelifting of the seats, 
steering wheel and badging took place prior to the official launch of the 
GT6 Mk3 in 1970.  In line with the Spitfire MkIV, the tail was 
'chopped-off' and the bonnet flattened out. The rear roof line of the GT6 
was altered and petrol cap and door handles ceased to protrude creating a 
more svelte look.  Optimism was high in the sales department but in reality 
the bell was tolling. The safety legislation meant a considerable increase 
in weight - the exhaust emission regulations badly affected the power of 
the six-cylinder engine and sales dropped...and dropped. No official death 
certificate was released but on the thirtieth of November 1973 the last two 
GT6s produced quietly left the factory."

Model       Built       len.   wid.   weight     Performance.     Total
                                                                  number 
GT6      7/66 to 9/68   12'1"  4'9"   1904 lb    0-50   7.8 sec   15,818
                                                 0-60  11.1 sec
                                               Top Sp.  108 mph

GT6+     7/68 to 12/70  12'3"  4'9"     ?        0-50   7.2 sec   12,066
(or Mk2)                                         0-60  10.0 sec
                                               Top Sp.  111 mph

GT6 Mk3 10/70 to 11/73  12'5"  4'10.5" 2030 lb   0-50   7.7 sec   13,042
                                                 0-60  10.1 sec
                                               Top Sp.  112 mph

(Lots more data available for anyone interested...)

Lee M. Daniels - Laboratory for Molecular Structure and Bonding - Texas A&M
   DANIELS@TAMLMSB.BITNET  |  daniels@lmsbvx.tamu.edu  |  (409) 845-3726


<Prev in Thread] Current Thread [Next in Thread>
  • GT6 historical data, Lee Daniels/TAMU-LMSB Systems <=