Judy,
although not an "expert", based on my experience with old british wiring, if
your wiring harness is original, it probably should be replaced. It is not
as daunting a task as it may appear, as the wiring on a TD is pretty simple.
Mark carefully what each wire comes off and mark from where it came.
and as they say in the Haynes manuals, reassembly is the reverse of the above.
jim fuerstenberg
"No matter where you go, there you are"
Buckaroo Banzai
jfuerstenberg@dcri.dla.mil or
xgg2356@dcri.dla.mil
|