> I am finally starting to work on my '68MGBGT. The floor boards
> have some rusty holes and need to be replaced or repaired. At this
> point I plan on reparing them. There is ~1/8 " of sound deadening
> coating on the floorboards and is a devil to scrape off. Anyone have
> suggestions as to how to remove this stuff? rej@cs.unc.edu
I have been told that to remove the undercoating on my MK2.4 Jag to use a
torch and scraper. Don't know if this would work ... well I am sure it
would work but the question is can one control the fire (;-). Seems like
some sort of breathing mask might be a good idea if you try this.
--
-------------------------------------------------------------------------
Mike Johnson
Systems Engineer UUCP: hpupora!mikej
MENTOR GRAPHICS Account Team HPDESK: Mike Johnson /HP2413/03
Hewlett Packard HPDESK to UNIX: mikej (hpupora) / HPA100/UX
Wilsonville Sales Office VOICE: (503) 682-8249
9255 SW Pioneer Ct. VOICE-MAIL: (503) 682-8220 (then 249)
Wilsonville, Oregon 97070 FAX: (503) 682-8105
-------------------------------------------------------------------------
|