ok, who's the wise guy?

[mit-eddie!wsl.dec.com!kent@EDDIE.MIT.EDU]

Comes time to flush the cooling system on Sarah (TR4A). I discover that
not only is there a drain at the bottom of the radiator, but one at the
rear of the block. Great, I think, this'll make it easy to get all the grunge 
out.

Except. That rear drain tap -- it's on the right side, just over the
starter. And it's built so that there's about 1/4 inch clearance at the
end of the pipe, so you can't really get a piece of tubing over it. 

Nice idea, but...

chris